Automation of obtaining vinyl acetate in a microrator
DOI:
https://doi.org/10.26577/JMMCS.2022.v113.i1.09Keywords:
automation, microreactor, SCARA type robot, vinyl acetateAbstract
Due to the lack of domestic manufacturers, the production of a microreactor with a control system for chemical processes will remain relevant. The reason for this is the demand for automated solutions and, in general, automation and research into the optimal conditions for promising chemical processes in companies and in production.
Moreover, the microreactor proposed with a chemical process control system will be able to save money and time on the development of effective chemical processes for the production of a wide variety of substances.
In addition, the project provides for the use of composite and polymer materials for work, which in turn will reduce the cost of manufactured products, and at the same time increase the competitive attractiveness.
The aim is to develop a microreactor and a control system for chemical processes.
This goal is achieved by justifying the choice of the direction of research, analysis of existing equipment for carrying out microreactor synthesis, application for their creation lightweight, composite and other technical materials, as well as through the development of technology for creating microreactor equipment using 3D printing, milling and engraving of light metals, composite and polymer materials.
The article presents microreactors and the development of a microreactor for the production of vinyl acetate, a detailed description of the methodology for the development of this complex device, including a microreactor, a SCARA type robot and a control unit. Methods for the production of vinyl acetate and the possibility of automating this process with a complex device were also studied.
References
[2] Hernandez K., Eryanen K., Salmi T.O., Murzin D.Yu., "Gas-phase microreactors: a powerful tool for kinetic research" , J. Ros. Chem. Society named after D.I. Mendeleev, 2 (2011): 16.
[3] Jensen K., Chem. Eng. Sci., 56 (2006): 293
[4] Aswathy K. Raghu, Niket S. Kaisare, "Thermally integrated microreactor for Sabatier reaction: Study of
air-cooled and inert-diluted counter-current operation strategies" , Catalysis Today, 2020 (ISSN 0920-5861,
https://doi.org/10.1016/j.cattod.2020.08.025).
[5] Okamoto H., Ushijima T., Kito O., "New methods for increasing productivity by using microreactors of planar
pumping and alternating pumping types" , Chemical Engineering Journal, 101(1-3) (2004): 57–63 (ISSN 1385-8947, https://doi.org/10.1016/j.cej.2003.11.033).
[6] Hessel V., Hardt S., L¨owe H., Sch¨ofeld F., "Laminar mixing in different interdigital micromixers: I. Experimental
characterisation" , AIChE J., 49(3) (2003): 566–577.
[7] Hassel V., Hardt S., L¨owe H., "Chemical Micro Process Engineering: Fundamentals, Modelling and Reactions" , WileyVCH, Weinheim, (2004): 5.
[8] Liu Y., Zhou W., Chen L., Lin Y., Xuyang Ch., Zheng T., Wan Sh., "Optimal design and fabrication of surface
microchannels on copper foam catalyst support in a methanol steam reforming microreactor" , Fuel, 253 (2019): 1545–1555 (ISSN 0016-2361, https://doi.org/10.1016/j.fuel.2019.05.099).
[9] G´omez A., Lafuente P.D., Rebollar C., Hern´endez M.A., Olgu´ın E.H., Jim´enez H., Rodr´ıguez J. "Design and construction of a didactic 3-dof parallel links robot station with a 1-dof gripper" , Journal of Applied Research and Technology, 12 (2014): 435–443.
[10] L´opez M., Castel´an F.J., Castro M., Pe˜na R. Osorio. "Using object’s contour, form and depth to embed recognition capability into industrial robots" , Journal of Applied Research and Technology, 11 (2013): 5–17.
[11] Surapong N., Mitsantisuk C. "Position and force control of the SCARA robot based on disturbance observer" , Procedia Computer Science, 86 (2016): 116–119.
[12] Omanov B.Sh., Khatamova M.S., Fayzullaev N.I., "Vinyl acetate production technologies" , Innovative science, 3 (2020): 10.
[13] Rihe A. Fundamentals of the technology of organic substances Per. with him. / Edited by D. D. Zykov (M.: State Scientific and Technical Publishing House of Chemical Literature, 1959): 531.
[14] Timofeev V.S. Principles of the basic technology of organic and petrochemical synthesis: Textbook Manual for universities V.S. Timofeev, L.A. Seraphimov. - 2nd ed., Perarab (M .: Higher. shk., 2003): 536.
[15] Temkin O.N., Shestakov G.K., Terer Yu.M. Acetylene: Chemistry, mechanism effect, technology (M: Chemistry, 1991): 416
